High-pressure dryers
HP-DRY heatless and HPR-DRY heat-regenerated ranges for PET blowing and other high-pressure networks.
Overview
High-pressure dryers
HP-DRY heatless and HPR-DRY heat-regenerated ranges for PET blowing and other high-pressure networks.
OMEGA AIR publishes each series in this range separately — the manufacturer's own description and characteristics for every one are listed below.
From the manufacturer
Product Features
HP-DRY series - High pressure adsorption dryers
HP-DRY high pressure adsorption dryers have been designed for continuous separation of water vapour from compressed air thus reducing dew point. Operation of the dryer requires two columns operated alternately. Adsorption takes place under pressure in the first column while the second column regenerates with a portion of already dried compressed air at ambient pressure. High pressure adsorption compressed air dryer consists from control valves, controller with LED display and two columns filled with desiccant. Springs in the columns make surethat the desiccant beads will not move during operation. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.
HPR-DRY - High pressure heat regeneration adsorption dryers
HPR-DRY adsorption dryers are designed for continuous separation of water vapour from compressed air thus reducing dew point. The operation of the dryer requires two columns operated alternately. Adsorption takes place under pressure in the first column while the second column regenerates with heated ambient air or purge. A dryer consists of two columns, filled with desiccant beads, blower, heater, controller with LCD display, valves, manometers, and support construction. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.
Manufacturer data
Technical Parameters
Characteristics as published by OMEGA AIR for each series in this range.
HP-DRY series - High pressure adsorption dryers
| operating presure | 50, 100, 250, 420 bar |
| operating temp. range | 1,5 to 50 °C |
| pressure dew points | -40 °C |
| flow rate | 50 to 1600 Nm3/h |
| standard colour | RAL 7021 |
Applications
- compressed air systems
HPR-DRY - High pressure heat regeneration adsorption dryers
| operating pressure | up to 50 bar |
| inlet air temperature range | 1,5 to 42,5 °C |
| pressure dew points | -40 °C (-25 °C and -55 °C on request) |
| flow rate | 2.485 to 23.400 Nm3/h |
| standard colour | RAL 7021 |
Applications
- compressed air systems
Source: omega-air.si
Each series above links to its own page on the manufacturer's site. Profiti sizes the equipment for your actual flow, pressure and air-quality class after a site survey.
Not sure which model fits your plant?
Tell us your flow, pressure and air-quality requirement — or let us measure them for you. A site survey costs you nothing.